Omron R88M-W60010T User Manual page 223

Operation
• The default allocations are as follows:
CN1, pin
No.
Input 7 POT (Forward drive prohibit input)
signal
8 NOT (Reverse drive prohibit input)
9 DEC (Origin return deceleration LS)
10 EXT1 (External latch signal 1)
11 EXT2 (External latch signal 2)
12 EXT3 (External latch signal 3)
Output 1/2 BKIR (Brake interlock output)
signal
23/24 General-purpose output signal
25/26 General-purpose output signal
● Input Signal Selections (Pn50A, Pn50B, Pn511)
Pn50A.0 Input signal selections 1 -- Not used.
Setting ---
range
Note Do not change setting.
Pn50A.1 Input signal selections 1 -- Not used.
Setting ---
range
Note Do not change setting.
Pn50A.2 Input signal selections 1 -- Not used.
Setting ---
range
Note Do not change setting.
Pn50A.3 Input signal selections 1 -- POT (forward drive prohibited) signal input terminal allocation (All
operation modes)
Setting 0 to F
range
Signal name
Unit ---
Unit ---
Unit ---
Unit ---
Enabled when the CN1-7 input signal turns ON
(L level).
Enabled when the CN1-8 input signal turns ON
(L level).
Enabled when the CN1-9 input signal turns ON
(L level).
Enabled when the CN1-10 input signal turns
ON (L level).
Enabled when the CN1-11 input signal turns
ON (L level).
Enabled when the CN1-12 input signal turns
ON (L level).
(Not allocated.)
(Not allocated.)
Default 1
setting
Default 8
setting
Default 8
setting
Default 1
setting
Chapter 4
Condition
Restart Yes
power?
Restart Yes
power?
Restart Yes
power?
Restart Yes
power?
4-27