Servo Driver Specifications - Omron R88M-W60010T User Manual

Standard Models and Specifications
2-4

Servo Driver Specifications

R88D-WN@-ML2/OMNUC W-series AC Servo Drivers (with Built-in
■
MECHATROLINK-II Communications)
Referring to 2-2 Servo Driver and Servomotor Combinations, select a Servo Driver to match the Ser-
vomotor that is being used.
2-4-1 General Specifications
Item
Ambient operating temperature 0 ° to 55 ° C
Ambient operating humidity
Ambient storage temperature
Ambient storage humidity
Storage and operating atmo-
sphere
Vibration resistance
Impact resistance
Insulation resistance
Dielectric strength
Protective structure
EC directives EMC directive EN55011 class A group 1
Low-voltage
directive
UL standards
cUL standards
Note 1. The above items reflect individual evaluation testing. The results may differ under compound
conditions.
Note 2. Absolutely do not conduct a withstand voltage test with a Megger tester on the Servo Driver.
If such tests are conducted, internal elements may be damaged.
2-50
90% max. (with no condensation)
− 20 ° to 85 ° C
90% max. (with no condensation)
No corrosive gasses.
10 to 55 Hz in X, Y, and Z directions with 0.1-mm double amplitude; acceler-
2
ation: 4.9 m/s max.
2
Acceleration 19.6 m/s max., in X, Y, and Z directions, three times
Between power line terminals and case: 0.5 M Ω min. (at 500 V DC)
Between power line terminals and case: 1,500 V AC for 1 min at 50/60 Hz
Between each control signal and case: 500 V AC for 1 min
Built into panel (IP10).
EN61000-6-2
EN50178
UL508C
cUL C22.2 No. 14
Specifications
Chapter 2