Omron R88M-W60010T User Manual page 286

Operation
Operation
■
Speed
Pn80C
Pn80A
4-4-12 Sequence Input Signals (All Operating Modes)
■ Functions
• These are sequence input signals for controlling Servo Driver operation. They must be connected
as required.
• Used for purposes such as latching the feedback position.
Parameters Requiring Settings
■
• Input Signals
Parameter Parameter name
No.
Pn511.1 Input signal selections
5 -- EXT1 signal allo-
cation
Pn511.2 Input signal selections
5 -- EXT2 signal allo-
cation
Pn511.3 Input signal selections
5 -- EXT3 signal allo-
cation
Connection
■
• Connect sequence input signals as shown in the following diagram.
4-90
Pn80B
Pn80E
Pn80D
Explanation
External latch signals 1, 2, and 3
Note: As the default setting, the signals are
allocated to CN1 pins 10, 11, and 12.
Pn80F
Time
Chapter 4
Reference
4-3-2 Important
Parameters