Separation Distance; Compatible Accessories And Peripherals - FujiFilm SonoSite M-Turbo User Manual

Separation distance

Recommended separation distances between portable and mobile RF communications
equipment and the M-Turbo ultrasound system
The M-Turbo ultrasound system is intended for use in an electromagnetic environment in which
radiated radio frequency (RF) disturbances are controlled. The customer or the user of the
M-Turbo ultrasound system can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment (transmitters)
and the M-Turbo ultrasound system as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum
output power of
transmitter
Watts
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance (d) in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in
watts (W) according to the transmitter manufacturer.
Note: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects, and people.

Compatible accessories and peripherals

FUJIFILM SonoSite has tested the M-Turbo ultrasound system with the following accessories and
peripherals and has demonstrated compliance to the requirements of IEC60601-1-2:2007.
You may use these FUJIFILM SonoSite accessories and third-party peripherals with the M-Turbo
ultrasound system.
106
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d=1.2
P
0.12
0.38
1.2
3.8
12
m
80 MHz to 800 MHz
d=1.2
P
0.12
0.38
1.2
3.8
12
800 MHz to 2.5 GHz
d=2.3
P
0.23
0.73
2.3
7.3
23