Cleaning And Disinfecting; Before Getting Started - FujiFilm SonoSite Edge II User Manual

Cleaning and Disinfecting

This chapter includes instructions for cleaning and disinfecting the ultrasound system,
transducers, and accessories.
Use the FUJIFILM SonoSite recommendations when cleaning or disinfecting your
ultrasound system, transducer, and accessories. Use the cleaning recommendations in the
peripheral manufacturer's instructions when cleaning or disinfecting your peripherals.
See Chapter 2, "Getting
See www.sonosite.com/transducers, for transducer images.

Before getting started

Follow the disinfectant manufacturer's recommendations regarding appropriate personal
protective equipment (PPE), such as protective eyewear and gloves.
Inspect the system and transducer to determine that they are free of any unacceptable
deterioration, such as corrosion, discoloration, pitting, or cracked seals. If damage is
evident, discontinue use, and contact FUJIFILM SonoSite or your local representative.
Confirm that cleaning and disinfecting materials are appropriate for your facility's use.
FUJIFILM SonoSite tests cleaners and disinfectants for use with the FUJIFILM SonoSite
systems and transducers.
Disinfectants and cleaning methods listed in this chapter are recommended by FUJIFILM
SonoSite for efficacy and material compatibility with the products.
Ensure that the disinfectant type and the solution strength and duration are appropriate
for the equipment and application.
Cleaning and Disinfecting
Started,"for images of the ultrasound system.
The system and transducers must be cleaned and disinfected
Notes
after each exam. It is important to follow these cleaning and
disinfecting instructions without skipping any steps.
For cleaning the TEEx transducer, refer to the cleaning and
disinfection instructions in the TEEx User Guide.
8-1