Patient Information Form - FujiFilm SonoSite M-Turbo User Manual

4 (Optional) To add a predefined label, select
Label, and then select the desired label group:
, , or . Select the group again for
the desired label.
The first number shows which label in the
group is selected. The second number is the
number of labels available.
See "Annotations setup" on page 18.
To turn off text entry, press the
To reset the home position
1 Press the key.
TEXT
2 Using the touchpad or arrow keys, position
the cursor where desired.
3 Select Home/Set.
To place an arrow on an image
You can add an arrow graphic to point out a
specific part of the image.
1 Press the key
ARROW
2 If you need to adjust the arrowʹs orientation,
press the key and then use the
SELECT
touchpad. When the orientation is correct,
press the key again.
SELECT
3 Using the touchpad, position the arrow where
desired.
4 Press the key to set the arrow.
ARROW
The arrow changes from green to white.
To remove the arrow, press the
then select Hide.
To place a pictograph on an image
The pictograph set available depends on
transducer and exam type.
1 Press the key.
PICTO
40

Patient information form

key.
TEXT
.
key and
ARROW
2 Select x/x to display the desired
pictograph, and then press the
The first number shows which pictograph in
the set is selected. The second number is the
number of pictographs available.
3 Using the touchpad, position the pictograph
marker.
4 (Optional) To rotate the pictograph marker,
press the key and then use the
SELECT
touchpad.
5 Select a screen location for the pictograph: U/L
(Up/Left), D/L (Down/Left), D/R
(Down/Right), U/R (Up/Right).
In a duplex layout, the pictograph is restricted
to upper left. In Dual, all four positions are
available.
To remove the pictograph, select Hide.
Patient information form
The patient information form lets you enter
patient identification, exam, and clinical
information for the patient exam. This
information automatically appears in the patient
report.
When you create a new patient information form,
all images, clips, and other data you save during
the exam are linked to that patient. (See "Patient
report" on page 77.)
To create a new patient information form
1 Press the PATIENT key.
2 Select New/End.
3 Fill in the form fields. See "Patient
information form fields" on page 41.
4 Select Done.
See also "To append images and clips to a patient
exam" on page 44.
key.
SELECT