Specifications; System Example - Epson RC180 Manual

1. Specifications

1.1 System Example

PLC (Sequencer)
Option Unit
Expansion
I/O Board
Fieldbus
- Profibus
- Devicenet
- CC-LINK
- EtherNet/IP
RS-232C Board
USB2.0
or
Ethernet
PC
Windows *1
EPSON RC+ 5.0
Vision Guide 5.0
VB Guide 5.0
GUI Builder 5.0
*1 EPSON RC+ 5.0 supports the following OS.
Windows XP Professional Service Pack 3 (EPSON RC+ 5.0 Ver.5.2.0 SP3 or after is required.)
Windows Vista Business Service Pack 2 (EPSON RC+ 5.0 Ver.5.3.1 or after is required.)
Windows 7 Professional (EPSON RC+ 5.0 Ver.5.3.4 or after is required.)
Windows 8.1 Pro (EPSON RC+ 5.0 Ver.5.4.6 or after is required.)
RC180 Rev.17
Operation Panel
RC180
Standard Installation
- Standard I/O
- Remote I/O
- Ethernet
Software
Ethernet
Option
Option
Option
Requires preparation by uses
Setup & Operation 1. Specifications
Motion Controller
ProSix
Driver Unit
C3 series
RS series
*
Connect OP1, TP1, and / or TP2
CV1
*
G series
S5 series
*
*
* Controls one of the robots.
(Option)
OP1
(Option)
TP1
TP2
(Option)
9