Epson RC180 Manual page 227

No. Message
The number of point file is beyond the
3810
limit.
The number of points is beyond the
3811
limit.
3850 File not found.
Uncommon error. Cannot obtain the
3900
internal communication buffer.
Buffer size is not enough.
3901
Undefined command was specified.
3910
Cannot enter the file name in the file
3911
name buffer.
Cannot obtain the internal buffer.
3912
Cannot set priority.
3913
3914 Invalid ICode.
3915 Invalid ICode.
3916 Invalid ICode.
3917 Invalid ICode.
3918 Invalid ICode.
3919 Invalid ICode.
3920 Invalid ICode.
3921 Invalid ICode.
RC180 Rev.17
Remedy
There are too many point files.
Reduce some point files that are
registered to project.
There are too many points defined by
registered point files.
Reduce some points.
Reboot the controller.
Rebuild the project.
Rebuild the project.
Rebuild the project.
Rebuild the project.
Rebuild the project.
Rebuild the project.
Rebuild the project.
Rebuild the project.
Maintenance 8. Trouble Shooting
Note 1 Note 2
215