Epson RC180 Manual page 145

(6)
(7) The following screen appears. Press the <F1> key to start the restore.
RC180 Rev.17
The following screen appears. Move the cursor to the desired folder.
Press the <Enter> key.
When the Controller serial number does not match the serial number of the selected
Controller setting data, the following screen appears. To continue, press the <F1>
key.
When the Controller system software version does not match the version of the
selected Controller setting data, the following screen appears. To continue, press
the <F1> key.
Maintenance 4. Backup and Restore
133