Epson RC180 Manual page 224

Maintenance 8. Trouble Shooting
No. Message
' ** ' is already used for the function
3315
name.
' ** ' is already used for the global
3316
preserve variable.
' ** ' is already used for the global
3317
variable.
' ** ' is already used for the module
3318
variable.
Dimension of the array variable does
3319
not match the declaration.
Return value type of the function does
3320
not match the declaration.
' ** ' is already used with function
3321
name.
' ** ' is already used with Global
3322
Preserve name.
' ** ' is already used with Global
3323
name.
' ** 'is already used with Module
3324
name.
3325 ' ** ' is already used with Local name.
The number of parameters does not
3326
match the declaration.
ByRef was not specified on Function
3327
declaration on parameter **.
ByRef was not specified on parameter
3328
**.
3329 Parameter ** type mismatch.
Linked OBJ file does not match the
3330
compiled Vision Project.
OBJ file size is beyond the available
3331
size after linking.
3332 Variable '**' is redefined.
Linked OBJ file does not match the
3333
compiled GUI Builder Project.
The number of variable which is using
3334 Wait command
maximum allowed.
Call cannot use in the parallel
3335
processing.
3336 Variable was redefined.
3405 DialogResult was not specified.
212
Correct the identifier ' ** ' or the function
name. Rebuild the project.
Correct the identifier ' ** ' or the global
preserve variable name.
project.
Correct the identifier ' ** ' or the global
variable name. Rebuild the project.
Correct the identifier ' ** ' or the module
variable name. Rebuild the project.
Correct the dimension of the array and
rebuild the project.
Correct the return value type of the
function and rebuild the project.
Correct the identifier ' ** ' or the function
name. Rebuild the project.
Correct the identifier ' ** ' or the global
preserve variable name.
project.
Correct the identifier ' ** ' or the global
variable name. Rebuild the project.
Correct the identifier ' ** ' or the module
variable name. Rebuild the project.
Correct the identifier ' ** ' or the local
variable name. Rebuild the project.
Check the number of parameters in the
function, correct the program, and then
rebuild the project.
Rebuild the project.
The OBJ file size exceeds the limit value
(8MB). Reduce the program.
Variable ' ** ' is overloaded.
unnecessary
rebuild the project.
Rebuild the project.
The number of variables which is using
Wait
are beyond the
maximum allowed (64).
variables and rebuild the project.
Call
processing.
rebuild the project.
Correct the data type of the variable and
rebuild the project.
DialogResult property setting value is
not specified in GSet statement.
to GUI Builder 5.0 "DialogResult
Property" and specify a proper setting
value.
Remedy
Rebuild the
Rebuild the
variable definition
command is exceeding
Delete the
cannot be used in parallel
Correct the program and
Note 1
Delete
and
the
Refer
RC180 Rev.17
Note 2