Epson RC180 Manual page 248

Maintenance 8. Trouble Shooting
No. Message
Smart camera. Project has not been
7502
set.
Smart camera. Vision property or
7503
result not supported.
Smart camera. Cannot open project
7504
file.
7505 Undefined vision sequence.
7506 Undefined vision object.
7507 Smart camera. Critical error.
7508 Smart camera. Invalid command.
7509 Invalid vision property value.
7510 Invalid vision property.
7511 Vision model not trained.
7512 Undefined vision calibration.
7513 Vision model object not Self.
7514 Invalid vision result.
7515 Vision object not found.
7516 No vision calibration.
7517 Incomplete vision calibration.
Smart camera.
7518
Cannot connect with camera.
Smart camera.
7519
Communication error.
236
Remedy
Rebuild the project.
Update the camera firmware.
Rebuild the project.
Check the sequence name.
Rebuild the project.
Check the object name.
Rebuild the project.
Initialize the camera.
Rebuild the project.
Update the camera firmware.
Check the property value.
Update the camera firmware.
Check the property name.
Update the camera firmware.
Teach the model.
Check the calibration name.
Rebuild the project.
Check the property value.
Check the result name.
Update the camera firmware.
Check the Found result before obtaining
the result.
Check the calibration name.
Perform calibration.
Check the camera connection.
Check the camera connection.
Note 1 Note 2
RC180 Rev.17