Epson RC180 Manual page 222

Maintenance 8. Trouble Shooting
No. Message
3273 DropDownStyle was not specified.
3274 EventTaskType was not specified.
3275 ImageAlign was not specified.
3276 IOType was not specified.
3277 FormBorderStyle was not specified.
3278 ScrollBars was not specified.
3279 SizeMode was not specified.
3280 StartPosition was not specified.
3281 TextAlign was not specified.
3282 TextAlign was not specified.
210
Remedy
DropDownStyle property setting value is
not specified in GSet statement. Refer
to GUI Builder 5.0
"DropDownStyle Property" and specify a
proper setting value.
EventTaskType property setting value is
not specified in GSet statement. Refer
to GUI Builder 5.0
"EventTaskType Property" and specify a
proper setting value.
ImageAlign property setting value is not
specified in GSet statement.
GUI Builder 5.0 manual "ImageAlign
Property" and specify a proper setting
value.
IOType property setting value is not
specified in GSet statement.
GUI Builder 5.0 manual
Property" and specify a proper setting
value.
FormBorderStyle property setting value
is not specified in GSet statement.
Refer to GUI Builder 5.0 manual
"FormBorderStyle Property" and specify
a proper setting value.
ScrollBars property setting value is not
specified in GSet statement.
GUI Builder 5.0 manual "ScrollBars
Property" and specify a proper setting
value.
SizeMode property setting value is not
specified in GSet statement.
GUI Builder 5.0 manual "SizeMode
Property" and specify a proper setting
value.
StartPosition property setting value is not
specified in GSet statement.
GUI Builder 5.0 manual "StartPosition
Property" and specify a proper setting
value.
TextAlign property setting value is not
specified in GSet statement.
This error occurs when the control type
cannot be identified because the control
is specified by a string variable. Refer
to GUI Builder 5.0 manual "TextAlign
Property" and specify a proper setting
value.
TextAlign property setting value is not
specified in GSet statement.
This error occurs when the control is a
text box. Refer to GUI Builder 5.0
manual "TextAlign Property" and specify
a proper setting value.
Note 1
manual
manual
Refer to
Refer to
"IOType
Refer to
Refer to
Refer to
RC180 Rev.17
Note 2