Cc-Link - Epson RC180 Manual

12.3.6 CC-Link

■ Make sure that the power is turned OFF before installing/removing any boards or
connecting/disconnecting any cables. Installing/removing any boards or
connecting/disconnecting any cables with the power ON is extremely hazardous
WARNING
and may result in electric shock and/or malfunction of equipment.
■ Pay attention to the followings in order to prevent the CC-Link connecter from
coming off.
CAUTION
Overview of CC-Link
CC-Link is one of fieldbus networks that provide easy interconnection between control
devices (PLC, PC, sensor, actuator, etc.).
CC-Link was developed as an open communication standard to connect various field
devices (sensor, actuator, robot controller, etc.). Because of the open communication
standard, CC-Link can easily construct multi-vendor system with various devices
developed around the world.
Motor Driver Motor Driver
from Company A from Company B
RC180 Rev.17
1. Use the connectors attached to the board.
2. Insert the connectors all the way seated.
3. Fix the cables at proper positions in order not to put a load on the
connectors.
Intelligent I/O
from Company C
Setup & Operation 12. Option Units
Master Device
CC-Link Network
Photo Sensor
from Company E
Intelligent I/O
from Company D
Analog Device
from Company G
HMI Device
from Company F
89