Epson RC180 Manual page 189

No. Message
Vision communication.
1521
Failed to initialize Ethernet.
Vision communication.
1522
Failed to terminate Ethernet.
Vision communication.
1523
Failed to create the socket handle.
Vision communication.
1524
Failed to connect.
Vision communication.
1526
Failed to send to the server.
Vision communication.
1527
Failed to read from the server.
Vision communication.
1528
Failed to set option.
Vision communication.
1529
Ethernet has not been initialized yet.
Vision communication.
1530
Connection is not completed.
Vision communication.
1531
All sockets are used.
Vision communication.
1532
Send timeout.
Vision communication.
1533
Read timeout.
Vision communication.
1534
Communication error.
Communication failure.
1550
Ethernet initialization error.
Communication failure.
1551
USB initialization error.
Communication
1552
internal communication error.
Communication failure. Invalid data is
1553
detected.
1555 Ethernet transmission error.
1556 Ethernet reception error.
1557 USB transmission error.
1558 USB reception error.
Communication
1559
allocate memory.
1580 Parser communication error.
Parser communication failure. Timeout
1581 error occurred during communication
with parser.
Parser communication failure. Parser
1582
transmission error.
RC180 Rev.17
Reboot the controller.
Reboot the controller.
Check the connection between the
camera and controller.
Check the connection between the
camera and controller.
Check the connection between the
camera and controller.
Reboot the controller.
Check the connection of the camera and
controller.
Check the connection between the
camera and controller.
Check the connection between the
camera and controller.
Check the connection between the
camera and controller.
Reboot the controller.
connection of the Ethernet cable.
Reboot the controller.
connection of the USB cable.
failure. Controller
Reboot the controller.
Check the connection between the PC
and controller.
Check the connection between the PC
and controller.
If the router is used between the PC and
controller, confirm that the DHCP
function is disabled.
Check the connection between the PC
and controller.
Check the connection between the PC
and controller.
failure. Failed to
1. Reboot the controller.
2. Upgrade the firmware.
1. Reboot the controller.
2. Reinstall the firmware.
Reboot the controller.
Rebuild the project.
Maintenance 8. Trouble Shooting
Remedy
Check the
Check the
Note 1 Note 2
177