Epson RC180 Manual page 192

Maintenance 8. Trouble Shooting
PC
No. Message
The controller is already connected to
1800
a PC.
The command was attempted without
1802
being connected to a controller.
Failed to read or write the file on the
1803
PC.
Initialization failure. Failed to allocate
1804
memory on the PC.
Connection failure.
1805 controller startup and connection of
the communication cable.
Timeout during
1806
Ethernet.
1807 Timeout during connection via USB.
1808 USB driver is not installed.
Unsupported. Unsupported command
1851
was attempted.
1852 System error. Uncommon error.
180
Only one PC can be connected to the
controller.
Check the
connection via
Failed to install EPSON RC+ 5.0.
Install EPSON RC+ 5.0 again.
1. Reboot the EPSON RC+5.0.
2. Reboot the PC.
3. Reinstall the EPSON RC+ 5.0.
Remedy Note 1 Note 2
RC180 Rev.17