Lcd Display - YASKAWA AC Drive-A1000 Technical Manual

4.2 Using the Digital Operator
u

LCD Display

No. Name
1 Operation Mode Menus
DriveWorksEZ
2
Function Selection
3 Mode Display Area
4 Ready
5 Data Display
Frequency
Reference
6
<1>
Assignment
LO/RE
7
<2>
Display
Function Key 1
8
(F1)
9 FWD/REV
80
1 2
10 9
Figure 4.2 LCD Display
Table 4.1 Display and Contents
Display
MODE Displayed when in Mode Selection.
MONITR Displayed when in Monitor Mode.
VERIFY Indicates the Verify Menu.
PRMSET Displayed when in Parameter Setting Mode.
A.TUNE Displayed during Auto-Tuning.
SETUP Displayed when in Setup Mode.
DWEZ Displayed when DriveWorksEZ is set to enable. (A1-07 = 1 or 2)
DRV Displayed when in Drive Mode.
PRG Displayed when in Programming Mode.
Rdy Indicates the drive is ready to run.
— Displays specific data and operation data.
OPR Displayed when the frequency reference is assigned to the LCD Operator Option.
AI Displayed when the frequency reference is assigned to the Analog Input of the drive.
Displayed when the frequency reference is assigned to the MEMOBUS/Modbus Communication
COM
Inputs of the drive.
OP Displayed when the frequency reference is assigned to an Option Unit of the drive.
RP Displayed when the frequency reference is assigned to the Pulse Train Input of the drive.
RSEQ Displayed when the run command is supplied from a remote source.
LSEQ Displayed when the run command is supplied from the operator keypad.
RREF Displayed when the run command is supplied from a remote source.
LREF Displayed when the run command is supplied from the operator keypad.
JOG
F1
Pressing executes the Jog function.
HELP
F1
Pressing displays the Help menu.
←
F1
Pressing scrolls the cursor to the left.
HOME
F1
Pressing returns to the top menu (Frequency Reference).
ESC
F1
Pressing returns to the previous display.
FWD Indicates forward motor operation.
REV Indicates reverse motor operation.
YASKAWA ELECTRIC SIEP C710616 31B YASKAWA AC Drive – A1000 Technical Manual
3 4
5
6
7
8
Content