Drive Options And Peripheral Devices; Drive Options And Peripheral Devices - YASKAWA AC Drive-A1000 Technical Manual

8.2

Drive Options and Peripheral Devices

The following table of peripheral devices lists the names of the various accessories and options available for Yaskawa drives.
Contact Yaskawa or your Yaskawa agent to order these peripheral devices.
• Peripheral Device Selection: Refer to the Yaskawa catalog for selection and part numbers.
• Peripheral Device Installation: Refer to the corresponding option manual for installation instructions.
Option
DC Reactor
AC Reactor
Braking Resistor ERF-150WJ Series
Analog Input AI-A3
Analog Monitor AO-A3
Digital Input DI-A3
Digital Output DO-A3
Complementary PG PG-B3
Line Driver PG PG-X3
PROFIBUS-DP SI-P3
CC-Link SI-C3
DeviceNet SI-N3
CANopen SI-S3
MECHATROLINK-II SI-T3
LED Operator JVOP-182
Remote Operator Cable WV001/WV003
USB Copy Unit JVOP-181
Attachment for External
EZZ020786
Heatsink
Installation Support Set A EZZ020642A
Installation Support Set B EZZ020642B
24 V Power Supply PS-A10L, PS-A10H
YASKAWA ELECTRIC SIEP C710616 31B YASKAWA AC Drive – A1000 Technical Manual
Table 8.1 Available Peripheral Devices
Model Number
Power Options
— Improves the power factor by suppressing harmonic distortion from the power supply.
Protects the drive when operating from a large power supply and improves the power
— factor by suppressing harmonic distortion. Highly recommended for power supplies that
exceed 600 kVA.
For use with systems that require dynamic braking with up to 3% ED. If higher ED is
required, use a Braking Resistor Unit.
Input/Output Option Cards
Allows high precision, high resolution analog reference input
Input channels: 3
Voltage input: -10 to 10 Vdc (20 kΩ), 13 bit signed
Current input: 4 to 20 mA or 0 to 20 mA (250 kΩ), 12 bit
Provides extra multi-function analog output terminals
Output channels: 2
Output voltage: -10 to 10 V, 11 bit (signed)
Sets the frequency reference by digital inputs
Input channels: 18 (including SET signal and SIGN signal)
Input signal type: BCD 16 bit (4 digit), 12 bit (3 digit), 8 bit (2 digit)
Input signal: 24 Vdc, 8 mA
Provides extra insulated multi-function digital outputs
Photocoupler relays: 6 (48 V, up to 50 mA)
Contact relays: 2 (250 Vac/up to 1 A, 30 Vdc/up to 1 A)
Motor Speed Feedback Option Cards
For speed feedback input by connecting a motor encoder
Input: 3-track (can be used with 1 or 2 tracks), HTL encoder connection, 50 kHz max
Output: 3-track, open collector
Encoder power supply: 12 V, max current 200 mA
For speed feedback input by connecting a motor encoder
Input: 3-track (can be used with 1 or 2 tracks), line driver, 300 kHz max
Output: 3-track, line driver
Encoder power supply: 5 V or 12 V, max current 200 mA
Communication Option Cards
Connects to a PROFIBUS-DP network.
Connects to a CC-Link network
Connects to a DeviceNet network
Connects to a CANopen network.
Connects to a MECHATROLINK-II network.
Interface Options
5-digit LED operator; max. cable length for remote usage: 3 m
RJ-45, 8-pin straight through, UTP CAT5e, extension cable (1 m or 3 m) to connect the
digital operator for remote operation.
Allows the user to copy and verify parameter settings between drives.
Also functions as an adapter to connect the drive to a USB port on a PC.
Mechanical Options
Installation kit for mounting the drive with the heatsink outside of the panel (Side-by-
Side mounting possible)
For installing the digital operator keypad on the outside of an enclosure panel that houses
the drive.
Supplies the drive controller with 24 Vdc power during main power loss

8.2 Drive Options and Peripheral Devices

Description
Refer to Digital Operator Remote Installation on page
Others
8
43.
361