Winding Drive - Lenze 4800 Manual

Show/Hide Bookmarks
Selection aid
15.8
15.8.1
15-18
48XX/49XXSHB0399
Modular box 2215

Winding drive

Purpose
For winding applications, e.g. winding of a paper reel, the drive can be
economically expanded as operator-friendly winding drive. For this, use the 2215
modular box. With this box, the winding drive can be individually adapted to many
different applications. Variants, such as winding drive with terminals, InterBus,
Beckhof bus or PROFIBUS are available. The parameters for the winding drive are
set as physical units which makes the usually complicated adjustment no longer
necessary.
L
FIG 15-9 Drive system 48XX/49XX as winding application
With winding drives, the following functions are possible:
( Winding/unwinding from top or bottom
Torque controlled winding with determination of the winding characteristic as
function or from a table with 16 values (here the diameter range of d
is subdivided into 16 section, the factor of the corresponding table position has
an influence on the initial tension). The characteristic can be changed from 0%
to 200%. This means:
- 0% = constant torque
- 100% = constant tension
- 200% = tension increase with larger diameters
These functions can be controlled via terminals.
L
L
4900Str107
to d
min max