Lenze 4800 Manual page 114

Show/Hide Bookmarks
Code Code Name Name
[C115*] Priority for
C112
C136* FDI
Status
Example for enable of additional T
( C112 -2- Digital input X2/E2
( C113 -1- Enable additional T
FIG 7-8
Except the functions "Enable JOG set-values", "Enable additional acceleration and
deceleration times", "Enable fixed set-values" and "Select parameter set", each
function can only be assigned to one terminal. An already assigned function will be
overwritting by re-assigning the input.
A function, which is already assigned to an input, can only be assigned to another
terminal, if the input used before is assigned with a new function.
LECOM code for FDI
The states of FDI (E1 ... E5) can be displayed in binar format in C136 or they can
be read out in HEX format via the LECOM interface.
FDI assignment in C136:
Possible settings
Lenze Selection
-0- Deactivate terminal function, if terminal control
is switched-off under C001. (X2/E4, E5)
-1- Terminal function remains active, if terminal
control is switched-off under C001. (X2/E1, E2,
E3)
Bit Free digital input
0 FDI 1
...
3 FDI 4
4 FDI 5
Parameter assignment for digital inputs
Bit 15 .........
not assigned
Configuration
Info
Only readable via LECOM.
C136 indicates the states of the digital
inputs as decimal or binary value. The
change of polarity under C114 is
considered in C136.
time for terminal E2
i
times
i
Bit 4 Bit 3 Bit 2
FDI5 FDI4 FDI3
4900Str035
Bit 1 Bit 0
FDI2 FDI1
48XX/49XXSHB0399
7-23