Lenze 4800 Manual page 134

Show/Hide Bookmarks
j
FIG 7-15
M
S1
S2
R
Features
( Either resolver or incremental encoder feedback
( Hardware connection between DF output and DF input
( Another evaluation of the set-value with a factor (numerator/denominator)
( External torque limitation possible
( QSP function for the individual drive. The DF set-value will be output
( RFR function for the individual drive. The set-value will be output to the DF
( Influence possible via codes for phase trimming and speed correction (via
( Following error limit adjustabel via code
( TRIP when reaching the phase controller limit
( Speed limit = 1.8 ¼ C011
( Phase controller influence of 0 (0 = deactivated) adjustable up to 1.00
( No alternative set-value conditioning available
Connection diagram for the configuration of the digital frequency bar
Master drive with master integrator
Slave 1
Slave 2
Resolver
for the corresponding slave (gearbox adaptation). Adjustable via LECOM,
motor potentiometer or analog terminal
independently of QSP.
output independtly of the QSP.
LECOM, motor potentiometer, analog terminal or one of the signal sources
under C145)
(JOG, additional set-value, set-value integrator...)
j
Configuration
j
4900Str042
48XX/49XXSHB0399
7-43