Lenze 4800 Manual page 66

Show/Hide Bookmarks
Installation
4-28
48XX/49XXSHB0399
( Variant V013 with PROFIBUS interface module
The interface module type 2130IB connects Lenze controllers to the fast serial
communication system PROFIBUS. With PROFIBUS it is possible to parameterize
and control a controller via a host.
FIG 4-21 Front view 2130IB
Connection
X12 RS485 bus
connection
X13-W30 Optical fibre
receiver
X13-W31 Optical fibre
sender
V1 2130IB supply OFF:
V2 Communicatio
n 2130IB
If the interface module 2130IB is no longer supplied, the bus system will not stop
working. However, the connected controller cannot be addressed by the host.
If necessary, the control stage of the controller should be supplied separately (see
chapter 4.3.3).
Explanations
9-pole SubD socket
(only 2130IB, V002)
(only 2130IB, V002)
Module is not supplied. Controller is switched off or connection is
interrupted(X4).
ON:
Module is supplied.
OFF:
No supply or 2130IB and controller not yet initialised.
ON:
Module 2130IB and basic unit are initialised but the PROFIBUS-DP
communication is still not working.
FAST BLINKING (4x per second):
PROFIBUS-DP communication with user data
SLOW BLINKING (1x per second):
PROFIBUS-DP communication initialised
4900Str116