Commissioning; Commissioning The 3Rw52 Soft Starter - Siemens SIRIUS 3RW52 Equipment Manual

Commissioning

7.1

Commissioning the 3RW52 soft starter

Procedure
1. Install the 3RW52 soft starter (Page 53).
2. Connect the 3RW52 soft starter (Page 81).
3. Parameterize the 3RW52 soft starter according to the application with the setting
4. Optionally, you can run diagnostics (Page 182) including Self-test (user-test) (Page 187)
5. Optionally seal the 3RW52 soft starter with a lead seal (Page 128).
Result
The 3RW52 soft starter is ready for operation and protected from external access.
You will find additional information on operating modes and the respective control priority in
chapter Operating modes and master control function (Page 32).
SIRIUS 3RW52 Soft Starter
Equipment Manual, 04/2020, A5E35630451002A/RS-AE/005
suggestions (Page 102).
If necessary, optimize the setting suggestions step by step (Page 101).
For example, you can continually adjust the current limiting factor while the motor is
starting up.
to test correct functioning of the 3RW52 soft starter.
7
127