Setting up the machine
2.7 Zero offsets
Zero offsets
Tool reference
Workpiece reference
Programmed ZO
Cycle reference
Total ZO
Procedure
2.7.3
Displaying and editing base zero offset
The defined channel-specific and global base offsets, divided into coarse and fine offsets,
are displayed for all set-up axes in the "Zero offset - Base" window.
Procedure
116
Displays the additional zero offsets programmed with
$P_TOOLFRAME.
Displays the additional zero offsets programmed with $P_WPFRAME.
Displays the additional zero offsets programmed with $P_PFRAME.
Displays the additional zero offsets programmed with $P_CYCFRAME.
Displays the active zero offset, resulting from the total of all zero
offsets.
1.
Select the "Parameter" operating area.
2
Press the "Zero offset" and "Overview" softkeys.
The "Zero Offsets - Overview" window opens.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
Select the "Parameter" operating area.
2.
Press the "Zero offset" softkey.
3.
Press the "Base" softkey.
The "Zero Offset - Base" window is opened.
4.
You can edit the values directly in the table.
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling