Teaching in a program
15.7 Deleting a block
Proceed as follows
676
1.
Select the "Machine" operating area.
2.
Press the <AUTO> or <MDA> key.
3.
Press the <TEACH IN> key.
4.
Press the "Teach prog." softkey.
5.
Press the ">>" and "Settings" softkeys.
The "Settings" window appears.
6.
Under "Axes to be taught" and "Parameters to be taught", select the
check boxes for the relevant settings and press the "Accept" softkey to
confirm the settings.
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling