Working with Manual Machine
14.6 More complex machining
Parameter
I
PL
14.6
More complex machining
The following functions are available to you for more extensive and complicated machining in
manual mode:
● Drilling (axial drilling, axial threads, drilling, reaming, deep-drilling, threads)
● Milling (pocket, shank, groove, multi-edged, engraving)
● Contour milling (contour, path milling, predrilling, pocket, spigots)
General sequence
For more complex machining processes, proceed in the following order:
● Select the desired function via the corresponding softkey.
● Input the desired values in the parameter screen form.
● Press the "OK" softkey in order to accept the values.
● Press the <CYCLE START> key.
658
Description
Center of circle I (inc) - only if circle input via end point and center point
Circle plane
XY IJ
•
YZ JK
•
ZX KI
•
The input screen form closes.
A line with the specified parameters is displayed on the basic screen.
The selected cycle is started.
Note
Note
You can return to the parameter screen form at any time to check and correct the inputs.
Press the "Cursor right" key to jump back to the input screen form.
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Unit
mm
Milling