Siemens SINUMERIK 840D sl Operating Manual page 284

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Creating a ShopMill program

7.17 Example, standard machining

3. Outside contour of the workpiece

Press the "Milling", "Multi-edge spigot" and "Rectangular spigot"

Enter the following technology parameters:

T End mill_20mm

Enter the following parameters:

Position of reference point

Type of position

Press the "Accept" softkey.

F 0.140 mm/tooth

Roughing (∇)

Single position

185(fictitious blank dimension)

Operating Manual, 03/2013, 6FC5398-7CP40-3BA1

Sinumerik 828d