Siemens SINUMERIK 840D sl Operating Manual page 283

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

2. Rectangular spigots, face milling

Operating Manual, 03/2013, 6FC5398-7CP40-3BA1

Machining direction

Retraction position pattern

Press the "Accept" softkey.

The work plan is displayed. Program header and end of program are

created as program blocks.

The end of program is automatically defined.

Press the "Milling" and "Face milling" softkeys.

Enter the following technology parameters:

T Facing tool_80mm

Enter the following parameters:

Press the "Accept" softkey.

Creating a ShopMill program

7.17 Example, standard machining

Plane selection, if MD 52005 =

F 0.10 mm/tooth V 750 m/min

Roughing (∇)

Sinumerik 828d