Siemens SINUMERIK 840D sl Operating Manual page 515

Toggling between the channels
Note
2-channel display
Unlike the smaller operator panels, the T,F,S window is visible for a 2-channel view in the
"Machine" operating area.
Program operating area
You can display as many as ten programs next to each other in the editor.
Displaying a program
You can define the width of the program in the Editor window using the settings in the editor.
This means that you can distribute programs evenly - or you can widen the column with the
active program .
Channel status
When required, channel messages are displayed in the status display.
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Press the <CHANNEL> key to toggle between the channels.
Press the <NEXT WINDOW> key to toggle within a channel column
between the three or four windows arranged one above the other.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Multi-channel view (only 840D sl)
9.3 Multi-channel view for large operator panels
515