Setting The Zero Offset - Siemens SINUMERIK 840D sl Operating Manual

14.3

Setting the zero offset

Select the work offset in the "Parameter" operating area directly in the work offset list.
Procedure
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. "Manual Machine" is active.
2. Select the "Parameter" operating area.
2. Press the "Work offset" and "G54...599" softkeys.
The "Work Offset G54...599" window opens.
3. Position the cursor on the desired work offset and press the softkey
"WO selection"
Now return to the basic screen and enter the selected work offset in the
"Work offset" field.
Working with Manual Machine
14.3 Setting the zero offset
651