Siemens SINUMERIK 840D sl Operating Manual page 465

Procedure
Parameter G code program
PRG
PL
RP
SC
F
FS
Residual material
CONR
Parameter Description
Machining
•
•
•
Machining
•
direction
•
Position
•
•
•
•
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
1. The part program to be executed has been created and you are in the
editor.
2. Press the "Turning" and "Contour turning" softkeys.
3. Press the "Grooving" softkey.
The "Grooving" input window opens.
Name of the program to be generated
Machining plane
Retraction plane –
(only for machining
direction, longitudinal,
inner)
Safety clearance
Feed (∇ or ∇∇∇) *
Finishing feedrate
(only for complete
machining: ∇ + ∇∇∇)
With subsequent residual material removal
Yes
•
No
•
Name to save the updated unmachined-part
contour for residual material removal - (only
"Yes" for residual material removal)
∇ (roughing)
∇∇∇ (finishing)
∇ + ∇∇∇ (roughing and finishing)
Face
Longitudinal
front
Back
internal
outside
Programming technological functions (cycles)
8.5 Contour turning- only for G code programs
mm
mm
*
Unit
465