Siemens SINUMERIK 840D sl Operating Manual page 484

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Programming technological functions (cycles)

8.6 Further cycles and functions

Call of an orientation transformation (TRAORI) after swiveling

If a program activating the orientation transformation (TRAORI) is to be executed on the

swiveled machining plane, the system frames – tool reference and rotary table reference –

for the swivel head or swivel table must be deactivated before TRAORI is called (see

example). The workpiece reference (WPFRAME) is retained.

Example (machine with swivel table)

N2 T="MILL_10mm"

N4 CYCLE800(1,"",0,57,0,40,0,-45,0,0,0,0,0,-1)

N5 CYCLE71(50,24,2,0,0,0,80,60,0,4,10,5,0,2000,31,5)

N11 EXTCALL "ROLL"

;Swivel cycle

;Face milling

;Swivel data set

;deselection

;Deactivate ;rotary

table reference

;Deactivate ;tool

;(only for ;swivel head

and ;mixed ;kinematics)

;Activate the

;orientation

;transformation

;Activate ;work offset

;Call 5-;axis machining

;program with ;direction

vectors ;(A3, B3, C3)

Operating Manual, 03/2013, 6FC5398-7CP40-3BA1

Sinumerik 828d