Siemens SINUMERIK 840D sl Operating Manual page 482

Programming technological functions (cycles)
8.6 Further cycles and functions
Procedure
Parameters, G code program
PL Machining plane
Parameter Description
TC Name of the swivel data record
Retraction
No: No retraction before swiveling
•
Z: Retraction in the direction of machine axis Z
•
Z, X, Y: Move machining axis to retraction position before swiveling
•
Tool direction, max.: Maximum retraction (up to the software end position) in the
•
tool direction
Tool direction, inc.: Retraction, incremental (up to the software end position) in the
•
tool direction
When retracting in the tool direction, in the swiveled machine state, several axes
can move (travel).
ZR Retraction path - (only for incremental retraction in the tool direction)
Swivel plane
New: New swivel plane
•
Additive: Additive swivel plane
•
X0 Reference point for rotation X
Y0 Reference point for rotation Y
Z0 Reference point for rotation Z
482
1. The part program or ShopMill program to be processed has been
created and you are in the editor.
2. Select the "Miscellaneous" softkey.
3. Press the "Swivel plane" softkey.
The "Swivel plane" input window opens.
4. Press the "Basic setting" softkey if you wish to reestablish the initial
state, i.e. you wish to set the values back to 0.
You use this,for example, to swivel the coordinate system back into its
original orientation.
Parameters, ShopMill program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
mm/min
mm/rev
rpm
m/min
Unit
Milling