Parameters For Block Search In The Search Pointer - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
4.7 Starting machining at a specific point
Note
Interruption point
You can load the interruption point in search pointer mode.
4.7.6

Parameters for block search in the search pointer

Parameter
Number of program level
Program:
Ext:
P:
Line:
Type
Search target
164
The Search window closes. The current block will be displayed in the
"Program" window as soon as the target is found.
5. Press the <CYCLE START> key twice.
Processing is continued from the defined location.
Meaning
The name of the main program is automatically entered
File extension
Pass counter
If a program section is performed several times, you can enter the number of
the pass here at which processing is to be continued
Is automatically filled for an interruption point
" " search target is ignored on this level
N no. Block number
Label Jump label
Text string
Subprg. Subprogram call
Line Line number
Point in the program at which machining is to start
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling