Procedure
Parameter
Description
LAB (only for G
Repeat jump label for position
code)
Position (only for
Enter the number of the position pattern
ShopMill)
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
1.
The part program or ShopMill program to be processed has been
created and you are in the editor.
2.
Press the "Drilling", and "Repeat position" softkeys.
The "Repeat positions" input window opens.
3.
After you have entered the label or the position pattern number, e.g. 1,
press the "Accept" softkey. The position pattern you have selected is
then approached again.
Programming technological functions (cycles)
8.1 Drilling
Unit
333