Alarm, error, and system messages
13.9 Remote diagnostics
References
For a description of configuration options, refer to the
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
13.9.2
Permit modem
You can permit remote access to your control via a teleservice adapter IE connected at
X127.
Procedure
646
5.
Enter new values in the group "Behavior for confirming remote access"
if you wish to change the behavior for confirming remote access.
6.
Press the "OK" softkey.
The settings are accepted and saved.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Software option
You need the "MC Information System RCS Host" option to display the
"Permit modem" softkey.
1.
The "Remote diagnostics (RCS)" window is opened.
2.
Press the "Permit modem" softkey.
Access to the control via modem is enabled so that a connection can be
established.
3.
To block access again, press the "Permit modem" softkey again.
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling