Specific Search In The Tool Management Lists - Siemens SINUMERIK 840D sl Operating Manual

11.12

Specific search in the tool management lists

There is a search function in all tool management lists, where you can search for the
following objects:
● Tools
● Magazine locations or magazines
● Empty locations
Procedure
...
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
– You enter a tool name. You can narrow down your search by entering a replacement
tool number.
You have the option of only entering a part of the name as search term.
– Enter the D number and, if necessary, activate the "Active D number" checkbox.
If only one magazine is configured, then the search is only made for the magazine
location.
If several magazines are configured, then it is possible to search a specific magazine
location in a specific magazine or just to search in a specific magazine.
If the lists with the location type are used, then the empty location search is made using
the location type and location size.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Tool list", "Tool wear" or "Magazine" softkey.
11.12 Specific search in the tool management lists
Tool management
563