Siemens SINUMERIK 840D sl Operating Manual page 419

Parameter
Retraction
(for ShopMill program)
ZR
(for ShopMill program)
Align tool through beta and gamma angles
β
(For ShopMill program
)
γ
(for ShopMill program)
Directly position rotary axes
B1
(for ShopMill program)
C1
(for ShopMill program)
αC
(for ShopMill program)
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Description
No
•
The axis is not retracted before swiveling
Z
•
Retraction in the direction of machine axis Z
Z,X,Y
•
Move machining axes to retraction position before swiveling
Tool direction, max.
•
Maximum retraction (up to the software end position) in the tool direction
Tool direction, inc.
•
Incremental retraction (specified retraction distance, up to the software end
position) in the tool direction
When retracting in the tool direction, in the swiveled machine state, several axes
can move (travel).
Retraction path - only for incremental retraction in the tool direction
Align tool
Input value
•
The required angle can be freely entered
β = 90°
•
β = 0°
0°
•
180°
•
The required angle can be freely entered
•
Directly align the tool with the swiveling axes:
The required angle can be freely entered
Directly align tool with swivel axes:
The required angle can be freely entered
Rotational position for a pole position
Programming technological functions (cycles)
8.4 Turning - only for G code programs
Unit
mm
Degrees
Degrees
Degrees
419