Siemens SINUMERIK 840D sl Operating Manual page 292

Creating a ShopMill program
7.17 Example, standard machining
10. Positions
11. Obstacle
Note
If this obstacle cycle is not inserted, the drill will violate the right-hand corner of the island
contour. Alternately, you could increase the safety clearance.
292
1. Press the "Drilling", "Positions" and "Drilling Positions" softkeys.
The "Any Positions" input window opens.
2. Enter the following parameters:
Z0
X0
Y0
X1
Y1
3. Press the "Accept" softkey.
1. Press the "Drilling", "Positions", and "Obstacle" softkeys.
The "obstacle" input window opens.
2. Enter the following parameters:
Z
3. Press the "Accept" softkey.
Rectangular
-10abs
15abs
15abs
165abs
15abs
2abs
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling