Siemens SINUMERIK 840D sl Operating Manual page 411

Procedure
Parameters, G code program
PRG Name of the program to be generated
PL Machining plane
Milling direction
•
•
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
TR Reference tool Tool, which is used in the "Stock removal" machining step. This is used
to determine the residual corners.
D Cutting edge number
Z0 Reference point in the tool axis Z
Z1 Pocket depth (abs) or depth referred to Z0 (inc)
DXY
Maximum plane infeed
•
Maximum plane infeed as a percentage of the milling cutter diameter
•
DZ Maximum depth infeed
Lift mode Lift mode before new infeed
If the machining operation requires several points of insertion, the retraction height to
which the tool is retracted, is selected as follows:
To retraction plane
•
Z0 + safety clearance
•
If there are no elements larger than Z0 in the pocket area, "Z0 + safety clearance" can
be selected as the lift mode.
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
1. The part program or ShopMill program to be processed has been
created and you are in the editor.
2. Press the "Contour milling" and "Spigot Res. Mat." softkeys.
The "Spigot Res. Mat." input window opens.
3. For the ShopMill program, press the "All parameters" softkey if you
want to enter additional parameters.
Synchronous
operation
Up-cut
operation
mm
mm
mm/min
Programming technological functions (cycles)
Parameters, ShopMill program
T Tool name
F Feedrate
S / V Spindle speed or constant
cutting rate
8.3 Contour milling
mm/min
mm/tooth
rpm
m/min
Unit
mm
mm
mm
%
mm
mm
mm
411