Siemens SINUMERIK 840D sl Operating Manual page 195

References
● Additional information is available in the following references:
● For information about configuring the displayed G groups, refer to the following
Procedure
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Function Manual, Basic Functions; Chapter, "Contour/orientation tolerance"
document:
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
1. Select the "Machine" operating area
2. Press the <JOG>, <MDI> or <AUTO> key.
3. Press the ">>" and "All G functions" softkeys.
The "G Functions" window is opened.
4.12 Displaying G Functions and Auxiliary Functions
Machining the workpiece
195