Siemens SINUMERIK 840D sl Operating Manual page 232

Generating a G code program
6.2 Program views
Parameter screen with graphic view
Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
Figure 6-3
232
Using the "Graphic view" softkey, you can toggle between the help
screen and the graphic view in the screen.
Parameter screen with a graphical view of a G code program block
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Milling