Siemens SINUMERIK 840D sl Operating Manual page 25

Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
<SELECT> + <CTRL>
When selecting table rows, switches between selected and not
selected.
<SELECT> + <SHIFT>
Selects in selection lists and in selection fields the previous entry
or the last entry.
<END>
Moves the cursor to the last entry field in a window, to the end of a
table or a program block.
Selects the last entry in selection lists and in selection fields.
<END> + <SHIFT>
Moves the cursor to the last entry.
Selects a contiguous selection from the cursor position up to the
end of a program block.
<END> + <CTRL>
Moves the cursor to the last entry in the last line of the actual
column or to the end of a program.
<END> + <CTRL> + <SHIFT>
Moves the cursor to the last entry in the last line of the actual
column or to the end of a program.
Selects a contiguous selection from the cursor position up to the
end of a program block.
<BACKSPACE>
• Editing box
Deletes a character selected to the left of the cursor.
• Navigation
Deletes all of the selected characters to the left of the cursor.
<BACKSPACE> + <CTRL>
• Editing window
Deletes a word selected to the left of the cursor.
• Navigation
Deletes all of the selected characters to the left of the cursor.
Introduction
1.2 Operator panel fronts
25