Fundamentals; Machining Planes - Siemens SINUMERIK 840D sl Operating Manual

7.3

Fundamentals

7.3.1

Machining planes

A plane is defined by means of two coordinate axes. The third coordinate axis (tool axis) is
perpendicular to this plane and determines the infeed direction of the tool (e.g. for 2½-D
machining).
When programming, it is necessary to specify the working plane so that the control system
can calculate the tool offset values correctly. The plane is also relevant to certain types of
circular programming and polar coordinates.
Working planes
Working planes are defined as follows:
Plane
X/Y
Z/X
Y/Z
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Tool axis
G17 Z
G18 Y
G19 X
Creating a ShopMill program
7.3 Fundamentals
255