Displaying Measured Curves - Siemens SINUMERIK 840D sl Operating Manual

17.5

Displaying measured curves

Display
Start of the measurement
Duration of the
measurement [s]
Device
Supplied energy [kWh]
Regenerated energy
[kWh]
Energy totals [kWh]
Procedure
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Meaning
Shows the time at which the measurement was started by the pressing
the "Start measurement" softkey.
Shows the measuring duration in seconds until the "Stop measurement"
softkey is pressed.
Displays the selected measured component.
Manual
•
Total, drives
•
Total, machine
•
Shows the supplied energy of the selected measured component in
kilowatts per hour.
Shows the regenerated energy of the selected measured component in
kilowatts per hour.
Shows the total of all measured drive values or the total of all axes as
well as fixed value and Sentron PAC.
1. The "SINUMERIK Ctrl-Energy Analysis" window opens and you have
already performed and saved measurements.
2. Press the "Graphic" and "Saved measurements" softkeys.
The measurement curves are displayed in the "SINUMERIK Ctrl-Energy
Analysis" window.
3. Press the "Saved measurements" softkey again if you only want to see
the actual measurement.
4. Press the "Details" softkey for the exact measurement data and
consumption values of the last three saved measurements and possibly
a current measurement.
Ctrl-Energy
17.5 Displaying measured curves
689