Siemens SINUMERIK 840D sl Operating Manual page 351

Machining type
You can select the machining mode for milling the circular spigot as follows:
● Roughing
● Finishing
● Chamfering
Procedure
Parameters, G code program
PL Machining plane
Milling direction
RP Retraction plane
SC Safety clearance
F Feedrate
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Roughing involves moving round the circular spigot until the programmed finishing
allowance has been reached.
If you have programmed a finishing allowance, the circular spigot is moved around until
depth Z1 is reached.
Chamfering involves edge breaking at the upper edge of the circular spigot.
1. The part program or ShopMill program to be processed has been
created and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Multi-edge spigot" and "Circular spigot" softkeys.
The "Circular Spigot" input window opens.
mm
mm
*
Programming technological functions (cycles)
Parameters, ShopMill program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
8.2 Milling
mm/min
mm/tooth
rpm
m/min
351