Creating/Editing A User Profile - Siemens SINUMERIK 840D sl Operating Manual

Activating a new SIM card
18.3

Creating/editing a user profile

User identification
Display
User name
Telephone number
User ID
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
2. Enter the PIN, repeat the PIN and press the "OK" softkey.
3. If you made an incorrect entry several times, enter the PUK code in the
"PUK Input" window and press the "OK" softkey to activate the PUK
code.
The "PIN input" window is opened and you can enter the PIN number as
usual.
1. Press the "Easy Msg." softkey.
The "SMS Messenger" window appears.
"Status" shows that the connection to the modem has been activated.
2. Press the "Settings" softkey.
3. Press the "Delete PIN" softkey to delete the stored PIN.
Enter the new PIN in the "PIN Input" window at the next power up.
Meaning
Name of the user to be created or logged on.
Telephone number of the user to which the messages are to be sent.
The telephone number must include the country code in order that
control commands can identify the sender (e.g. +491729999999)
The user ID has 5 digits (e.g. 12345)
It is used to activate and deactivate the user via SMS. (e.g.
•
"12345 activate")
The ID is used to additionally verify the incoming and outgoing
•
messages and to activate the control commands.
Easy Message (828D only)
18.3 Creating/editing a user profile
695