Commissioning Easy Extend - Siemens SINUMERIK 840D sl Operating Manual

Procedure
19.4

Commissioning Easy Extend

As a rule, the "Easy Extend" function has already been commissioned by the machine
manufacturer. If a first commissioning has not been performed or if, for example, function
tests are to be performed again (e.g. when retrofitting additional devices), this is possible at
any time.
The "Start-up" softkey has been declared as Manufacturer data class (M).
Procedure
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
1. Easy Extend is opened.
2 You can select the desired device in the list with the <Cursor up> and
<Cursor down> keys.
3. Position the cursor on the device option for which the function has been
unlocked and press the "Activate" softkey.
The device is marked as activated and can now be used.
4. Select the desired activated device and press the "Deactivate" softkey
to switch the device off again.
1. Select the "Parameter" operating area.
2. Press the menu forward key and then the "Easy Extend" softkey.
3. Press the "Start-up" softkey.
A new vertical softkey bar appears.
4. Press the "Comm. start-up" softkey to start the commissioning.
Before starting, a complete data backup is generated which you can
then use in an emergency.
Easy Extend (828D only)
19.4 Commissioning Easy Extend
705