13.9.3
Request remote diagnostics
Using the "Request remote diagnostics" softkey, from your control you have the option of
actively requesting remote diagnostics with your machinery construction OEM.
The access via modem must be enabled if the access is to be made via modem.
When requesting remote diagnostics, you obtain a window with the corresponding pre-
assigned data and values of the ping service. If required, you can ask your machine
manufacturer for this data.
Data
IP address
Port
Send duration Duration of the request in minutes
Send interval
Ping send
data
Procedure
References
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Meaning
IP address of the remote PC
Standard port that is intended for remote diagnostics
Cycle in which the message is sent to the remote PC in seconds
Message for the remote PC
1.
The "Remote diagnostics (RCS)" window is opened.
2.
Press the "Request remote diagnostics" softkey.
The "Request remote diagnostics" window is displayed.
3.
Press the "Change" softkey if you would like to edit the values.
4.
Press the "OK" softkey.
The request is sent to the remote PC.
Alarm, error, and system messages
13.9 Remote diagnostics
647