All G Functions - Siemens SINUMERIK 840D sl Operating Manual

References
For more information about configuring the displayed G groups, refer to the following
document:
SINUMERIK Operate (IM9) / SINUMERIK 840D sl Commissioning Manual
4.12.2

All G functions

All G groups and their group numbers are listed in the "G Functions" window.
Within a G group, only the G function currently active in the controller is displayed.
Additional information in the footer
The following additional information is displayed in the footer:
● Current transformations
Display
TRANSMIT
TRACYL
TRAORI
TRAANG
TRACON
● Current zero offsets
● Spindle speed
● Path feedrate
● Active tool
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Meaning
Polar transformation active
Cylinder surface transformation active
Orientation transformation active
Inclined axis transformation active
Cascaded transformation active
For TRACON, two transformations (TRAANG and TRACYL or TRAANG and
TRANSMIT) are activated in succession.
4.12 Displaying G Functions and Auxiliary Functions
Machining the workpiece
193