8. Drilling/centering
9. Drilling/reaming
Milling
Operating Manual, 03/2013, 6FC5398-7CP40-3BA1
1.
Press the "Drilling" and "Centering" softkeys.
The "Centering" input window opens.
2.
Enter the following technology parameters:
T
Centering_tool_10m
m
3.
Enter the following parameters:
Diameter/tip
∅
DT
4.
Press the "Accept" softkey.
1.
Press the "Drilling", "Drilling reaming" and "Drilling" softkeys.
The "Drilling" input window opens.
2.
Enter the following technology parameters:
T DRILL10
3.
Enter the following parameters:
Diameter/tip
Z1
Predrilling
Through drilling
DT
4.
Press the "Accept" softkey.
Creating a ShopMill program
7.17 Example, standard machining
D1
F 1000 mm/min
Diameter
5
0.6
s
D1
F 500 mm/min
Tip
-25abs
No
No
0
S 12000 rev/min
S 1600 rev/min
291